01-19-2021, 09:52 PM
Cylinder 10 Contribution/Balance
Code P0290 is triggered when the Engine Control Module (ECM) detects that the acceleration rate of the crankshaft for Cylinder 10 was less than a calibrated amount. During normal conditions, the ECM turns the Fuel Injectors ON and OFF in the Fuel Injection System.
Cause:
Dirty Fuel Injector 10
Faulty Fuel Injector 10
Plugged Fuel Injector 10
Fuel injector 10 harness is open or shorted
Fuel injector 10 circuit poor electrical connection
Symptoms:
Check engine light
Engine Misfire
Engine Run Rough
Low MPG
Code P0290 is triggered when the Engine Control Module (ECM) detects that the acceleration rate of the crankshaft for Cylinder 10 was less than a calibrated amount. During normal conditions, the ECM turns the Fuel Injectors ON and OFF in the Fuel Injection System.
Cause:
Dirty Fuel Injector 10
Faulty Fuel Injector 10
Plugged Fuel Injector 10
Fuel injector 10 harness is open or shorted
Fuel injector 10 circuit poor electrical connection
Symptoms:
Check engine light
Engine Misfire
Engine Run Rough
Low MPG