Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

P0742-Torque-Converter-Clutch-Circuit-Stuck-On
#1

Torque Converter Clutch Circuit Stuck On

The Torque Converter Clutch (TCC) solenoid valve is activated, with the gear in D4, by the Transmission Control Module (TCM) in response to signals sent from the vehicle speed and the Engine Control Module (ECM). Lock-up piston operation will then be controlled. When the torque converter clutch solenoid valve is activated, the torque converter lockup clutch will engage creating a 1 to 1 RPM ratio between the transmission input shaft and the rotational speed of the torque converter.

Lock-up operation, however, is prohibited when A/T fluid temperature is too low.

When the accelerator pedal is depressed (less than 2/8) in lock-up condition, the engine speed should not change abruptly. If there is a big jump in engine speed, there is no lock-up.

Cause:
Low transmission fluid level
Dirty transmission fluid
Faulty torque converter clutch solenoid valve
Torque converter clutch solenoid valve harness or connectors
Torque converter clutch solenoid valve circuit is open or shorted
Transmission internal mechanical problem

Symptoms:
Check engine light
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)